PCBgogo

Electronic Project Engineer's Best Partner!
z****gyu
How DO I submit a PCB design that doesn’t have a schematic?
3256 4 Oct 09.2018, 15:34:28

Here's a strange one. I want some PCB's made but the design doesn't have a schematic, so how do I submit it to the PCB factories in China?
PCB size 30mm x 100mm 1.6mm FR4


Side 1   Groundplane with 1mm wide 25mm long slots in copper at 33mm and 66mm


Side 2  5mm wide strip along one long edge with multiple vias through to groundplane side

That's it, so how do I create the PCB design files if there is no circuit?

  • Comments(4)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
Browse
Submit
header
K****ock

May 20.2020, 16:31:57

In EAGLE, you can stat with an empty schematic, switch over to the board and draw copper areas (and gaps in the solder stop mask, and markings, ...). The free edition of EAGLE allows component placement only in a 80mm by 100mm area...but I recall that "drawing copper" has no size limit.

The CAM Processor can then generate Gerber files for you, which you can then upload to PCBgogo.

Approval(0) Reply

Submit
header
**

Oct 03.2019, 04:16:41

A schematic is not necessary to have a pc board made.  Just generate the gerber files and submit to the board manufacturer.  Gerber files are generated from the board and not a schematic.

Approval(1) Reply

Submit
header
**

Dec 24.2018, 09:54:19

I can help you develop a simple design pcb.

Pavel

pvo317@gmail.com

Approval(0) Reply

Submit
header
**

Oct 09.2018, 18:06:08

Hi, sir, if you do not have schematic, you should inquiry on solution company to design your PCB first.

After you get the PCB file, then you could go to our website to order PCB.

Because we do not have engineer to do PCB solution, so we could not help you.

Sorry again

Eric

Approval(13) Reply

Submit
Share the Project