We schedule production in shifts to hit our 24-hour quick-turn promise without cutting corners on quality checks. Every panel is tracked through MES so we know exactly where a job stands at any moment.

Mark Ellison

Production Manager

Before any board goes to fab, I run a DFM check on trace width, annular ring, and copper-to-edge clearance. Catching these issues early saves customers a re-spin and keeps their project timeline intact.

Priya Sharma

DFM Engineer

Our SMT lines handle fine-pitch BGA and 0201 components daily. Reflow profiles are validated per board stack-up, and we run first-article inspection before committing to a full production run.

Carlos Rivera

SMT Assembly Supervisor

Controlled impedance boards require tight lamination press control. We validate stack-up with TDR testing on sample coupons before shipping, so customers get the tolerance they specified, not an approximation.

Wei Zhang

Process Engineer

Laminate and surface finish selection affects reliability more than most customers realize. I work with engineering teams to match FR-4 grade, copper weight, and finish to their thermal and signal requirements.

Rachel Kim

Materials Engineer

Every board runs through flying probe or fixture E-test depending on volume, and AOI catches solder defects before boards leave the line. We don't skip testing steps even on rush orders.

Tom Bradley

Test Engineer

After sourcing from dozens of manufacturers over 10 years, PCBgogo stands out on board quality and consistency. Self-operated factories with full-process control. That's reflected in a 9.0/10 rating from over 100,000 global customers.

Nina Patel

Global Procurement Director

Component sourcing is often the real bottleneck in a build. We maintain relationships with authorized distributors so lead-time-sensitive parts don't stall a customer's assembly schedule.

George Liu

Sourcing / Procurement Manager

HDI and microvia designs need precise laser drilling and layer registration. I review stack-up files against our capability limits before quoting, so what we promise is what we can actually deliver.

Hannah Wu

R&D / HDI Engineer

Packaging is tailored to board thickness and panel size to prevent flex damage in transit. We track every shipment and flag delays proactively rather than waiting for a customer to ask.

Peter Grant

Logistics Coordinator

I spend a lot of my day translating between customer specs and what's actually manufacturable at scale. Flagging a design issue before fab, not after, is where I think we add the most value.

Olivia Martin

Sales Engineer

Every panel gets a barcode at the start of the line, so we can trace materials, process steps, and test results back to a specific job. That traceability matters most when something needs investigating.

Ryan Cooper

IT / Traceability Manager

Every board goes through 100% electrical testing — flying probe and fixture E-test — plus AOI with human second-pass inspection for BGA and HDI layouts. Our manufacturing processes comply with ISO 9001 and UL certifications, while also meeting RoHS environmental requirements.

James Foster

Quality Assurance Director

Raw materials get inspected against IPC-A-600 acceptance criteria before they ever reach the line. It's not the most visible part of the process, but it's where a lot of downstream problems get caught early.

Susan Byrne

Incoming Quality Inspector

At PCBgogo, we enforce IPC-Class 2 and Class 3 standards across every production run. We implement comprehensive full-inspection controls for PCB and PCBA products throughout production to prevent defective finished goods from being delivered to customers.

Daniel Ortiz

Senior Process Engineer