日本語
I bought a T-962A oven and upgraded it with the firmware by the Unified Engineering.
Now I am wondering - what kind of solder paste should I buy to use the standard profiles.
Thanks!
- Comments(1)
A****min
Nov 06.2019, 09:21:40
Any decent solder paste will have a solder profile in its datasheet. The UE firmware also has some pre-programmed profiles. Depending on what you intend to do.Even with the improved firmware and the HW modifications, the actual temperatures of the T962A have the inherent problem of any IR heater: they depend more on surface absorption and distance to the IR source than anything else.
I once tried soldering two-sided PCBs and simply placed them on the large caps, which had been soldered in the first run. The PCB was now about 10mm closer to the heaters.
Result: the burned PCBs still sit on my desk to remind me of this desaster. The room became usable again after about three days with the window constantly open. The smell of burned FR4 is incredible.
L****ana
May 21.2024, 04:22:47
It won't take you long to find an online casino in Australia. Visit Joe Fortune Casino? and choose the online casino that best suits your needs. Study the information about each of the casinos and get started gambling, which will give you a variety of bonuses for a long time to come. You will be delighted with how easy and fun it is. So what are you waiting for? Hurry up and start having fun.
