日本語
M****rst
12 cells Lipo Monitor and Balancer
6810
0
Jul 25.2018, 18:36:46
Monitor and balance up to twelve cells of lithium polyumer accu using a LTC6803-3
- Balance each cell with 300mA current.
- SPI Interface is galvanically separated. Can be used with 3,3V and 5V.
- High cell voltage accuracy made by the LTC6803-3
Double sided PCB was made bei PCBgogo in very good quality. Also the LTC6803-3 was orderd and fit on the PCB by PCBgogo.
Very good job. Thanks.
Marc Wapelhorst
-
Bee scale NB-IoTThis is scale that measures hive weight and send over GSM NB link2438 0 Jul 18.2018, 01:18:06 -
High voltage gain boost converter based on voltage lifts techniquesHere are the photography of prototype. The conversion ratio of boost voltage with voltage lifts capability can boost up to 4 times higher than the traditional boost converter. It is simply added two more L and C resonant circuit plus additional diodes to control the current flows for achieving this circuit operation.5868 0 Jul 15.2018, 08:46:30 -
Validador_2018Contactless smart card reader to instal on buses and allow the trip cards.3215 0 Jul 09.2018, 17:36:23
- Comments(0)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
