M****mer
Control 27 project
2674
0
May 01.2018, 19:14:25
Transmitter and receiver boards, plus an aluminium extrusion endplate, for a relay output, logic/contacts/buttons input industrial remote control link.
With a 2 watt RF output power and a very robust and sensitive receiver I anticipate a range of several miles with good aerials
-
PilgrimCustom design, for a legacy application requiring unusually low audio distortion and audio intermodulation, combined with exemplary RF performance parameters. The Pilgrim receiver is a multichannel (single loop synthesizer) design incorporating a triple conversion architecture, with an unusual low frequency PLL demodulator. Switching mixers are used throughout the signal path to ensure good large signal handling. : The board was made, and the surface mount assembly done, by PCBgogo5032 0 Apr 26.2018, 14:41:13
-
ThanksI arrive very quickly, with respect to work, it is wonderful I am happy to have found this company, recommended 100%5185 0 Apr 21.2018, 06:48:42
-
power boardpower board for a switch unit5098 0 Apr 18.2018, 21:17:33
- Comments(0)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP