日本語
Comment and share
-
LED DC-DCThis was the first PCB version of an innovative 2 stage DC-DC converter, intended to allow 180v LED arrays to operate from a 12v DC (nominal) supply. - The PCBgogo boards were, as usual, of exemplary quality and the first build (on these boards) has proceeded with no problems1341 0 Dec 17.2018, 16:36:23 -
Control 27 projectTransmitter and receiver boards, plus an aluminium extrusion endplate, for a relay output, logic/contacts/buttons input industrial remote control link. With a 2 watt RF output power and a very robust and sensitive receiver I anticipate a range of several miles with good aerials2677 0 May 01.2018, 19:14:25 -
PilgrimCustom design, for a legacy application requiring unusually low audio distortion and audio intermodulation, combined with exemplary RF performance parameters. The Pilgrim receiver is a multichannel (single loop synthesizer) design incorporating a triple conversion architecture, with an unusual low frequency PLL demodulator. Switching mixers are used throughout the signal path to ensure good large signal handling. : The board was made, and the surface mount assembly done, by PCBgogo5037 0 Apr 26.2018, 14:41:13
