日本語
M****mer
LED DC-DC
1368
0
Dec 17.2018, 16:36:23
This was the first PCB version of an innovative 2 stage DC-DC
converter, intended to allow 180v LED arrays to operate from a 12v DC
(nominal) supply.
-
The PCBgogo boards were, as usual, of exemplary quality and the first
build (on these boards) has proceeded with no problems
-
CP160PCBGoGo delivered a very satisfying quality PCBs. Its quality is comparable with German PCB Manufacturers. The good thing is that they manufacture PCBs very quick within 2 days and ship ASAP. I am very satisfied and recommend others. I would order PCBs here again.1386 0 Dec 10.2018, 12:39:05 -
Peppermill OverdriveThe board is made very precisely, it's clean and very pleasant to touch. Markings on the silkscreen layer are very good readable. Soldering does not cause trouble, tin adheres very well to soldering points with a small amount of flux. It is also worth mentioning that the PCB is very robust to desoldering. The company is very solid, although you order 10 pieces, you get at least 1 PCB more for test, prototype, present, etc. The results of the company's work are as in the picture.1462 0 Dec 02.2018, 05:32:40 -
CMOS FuzzThe board is made very precisely, it's clean and very pleasant to touch. Markings on the silkscreen layer are very good readable. Soldering does not cause trouble, tin adheres very well to soldering points with a small amount of flux. It is also worth mentioning that the PCB is very robust to desoldering. The company is very solid, although you order 10 pieces, you get at least 1 PCB more for test, prototype, present, etc. The results of the company's work are as in the picture.1233 0 Dec 02.2018, 05:32:40
- Comments(0)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
