日本語
O****and
Nixie clock
4510
0
Feb 08.2018, 06:03:21
Ongoing Nixie clock projekt, with 12 tubes (IN-8-2 and IN-16). These are tube slot cards, intended to be mounted on a vertical standing PCB.
Anode resistors (0805, rated 150V) are mounted on the bottom layer of the boards.
The main board is on the way, looking forward to get this going !
-
SpeedometerAim is to build plug-and-play replacement of original speedometer.6029 0 Feb 07.2018, 23:06:36 -
1 chip challenge.Updated design for a low cost alternative to the expensive 2 chip game cartridge. Selectable chip type and game save eprom.2824 0 Feb 06.2018, 21:21:34 -
BMS adaptationThe project adapts communications via CAN bus to make it compatible with electric motorcycle. It also intercepts the communications in the original card to control the number of cells to be balanced.5939 0 Feb 04.2018, 22:07:06
- Comments(0)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
