日本語
F****ich
UniDecoder4
4016
0
May 11.2018, 16:00:29
DCC Decoder für die Modellbahn
-
BM1RMRückmelder für die Modelleisenbahn5498 0 May 11.2018, 15:56:42 -
Control 27 projectTransmitter and receiver boards, plus an aluminium extrusion endplate, for a relay output, logic/contacts/buttons input industrial remote control link. With a 2 watt RF output power and a very robust and sensitive receiver I anticipate a range of several miles with good aerials2676 0 May 01.2018, 19:14:25 -
PilgrimCustom design, for a legacy application requiring unusually low audio distortion and audio intermodulation, combined with exemplary RF performance parameters. The Pilgrim receiver is a multichannel (single loop synthesizer) design incorporating a triple conversion architecture, with an unusual low frequency PLL demodulator. Switching mixers are used throughout the signal path to ensure good large signal handling. : The board was made, and the surface mount assembly done, by PCBgogo5037 0 Apr 26.2018, 14:41:13
- Comments(0)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
